Favourites

ABS-wheels

Air filters

Boot mats

Brake caliper paint

Driving lights

Gear knobs

H7 LED

Imaz IM5

Japan Racing

LED bars

Ocean MK18

Poppy

Rims

Sport seats

Window tint

Wind deflectors

Popular products

Audi A4 B7

Audi A4 B8

Audi A6 4G

BMW E61

BMW E90/E91

BMW F10/F11

BMW F20/F21

BMW F30/F31

Volvo S60

Volvo V60

Volvo V70N 2000-2004

Volvo V70NN 2008-2016

Volvo XC60

VW Caddy

VW Golf 4

VW Golf 7

Popular cars

About us

Sustainability

This is SC Styling

Information

Products

Boost your performance - right now 15% discount on Green Filter 💚

<div class="cssArtItemDescrLong cssTblTxtByClr">
Cableharness kit for the picky. Adapted for new cars sensitive electric system, where only 1mA(12V) / 2mA(24V), is picked from vehicles high beam to relay control current .
Also well isolated and vehicle adjusted, for LED Ramp with DT connector, with max continuos consumtion of 12v 216W(6A), or 24v 288W(4A)With DT-contact for simple installation.
</div>

Complete  Relayset for LED ramp with DT-Kontakt for cars with Canbus


LED bar holder from Strands on a completely new professional level with a nice looking installation of LED ramp on your vehicle.
Mounted behind the license plate. Made of steel. Very easy assembly.

<div id="ctl00_main_showProduct_tabContent_body" class="ajax__tab_body">
<div id="ctl00_main_showProduct_tabContent_pnlProductDescription" class="ajax__tab_panel">Assembled behind license plate. Fits most cars where plate is not much lowered and where bumber is not standing out above the licence plate. Black eloxidized. Price per pcs. If you have a lowered licence plats you might need bushings behind holder. CC: 41,5cm</div>
</div>

Driving lights holder universal to fit 2 drivinlig lights. This can easily be assembled behind licence plate

Nice LED-bar holder/bracket to assemble behind license plate. This LED bar bracket is manufactured in black steel with black powdercoat. Very nice assembly. Good possibilities to screw thanks to oval holes. Dimensions 510x100mm. See pictures for other dimensions.

Good LED-bar holder/bracket for a nice assembly of LED bar on your vehicle.

Relay set for driving lights and Led Light bar 12V. Complete with cables and cable shoes. Max 200W. Price per set 40A

Complete Relay set for 2 driving lights max 200W

Top bracket for driving lights. Item is sold per piece.

The Cruise Light wireless control box is the first device on the market that gives you the ability to control all types of lighting in your vehicle with the touch of a button. This wireless control box takes your driving experience to the next level and is suitable for all types of vehicles. The control box is equipped with six different output channels, giving a total capacity of 700W. The two 150W (15A) channels are designed for Cruise Light flashing beam ramps while the four 100W (10A) channels can be used for all types of vehicle lighting. The control box can be controlled wirelessly via a battery-powered control unit or with a signal cable. The relay box supplied with the control box is durable, waterproof (IP67), and the rubber gaskets protect the cables. The control box can be placed anywhere in the vehicle or connected to a USB cable. The Cruise Light wireless control box is the first on the market to offer the ability to easily control all types of vehicle lighting with the touch of a button. This wireless device is designed to take your driving to the next level. The control box is equipped with nine orange buttons, eight white buttons and one blue button. The orange buttons are specially designed for Cruise Light flashing light ramps and allow, for example, to change the warning light pattern. The white buttons are for day mode, night mode and Cruise Light mode. The three traffic advisory buttons (left, centre, right) allow you to switch between flashing from right to left, centre to outside or left to right. Pressing the blue button turns all lights on and off, and all lights return to their previous status thanks to the built-in memory function. The relay box that comes with the control box is durable, waterproof and protects the cables with rubber gaskets. You can operate the control box wirelessly with batteries (4x AAA, not included) or via a USB cable, or control all lighting with the signal cable. This makes it possible to connect, for example, a rear light to one of the four output channels and use it as a work light. So with the Cruise Light wireless control box and relay box, you get a dual function that enhances your driving.

Cruise Light wireless control box gives you the ability to easily and efficiently control all types of lighting in your vehicle with the touch of a button

Clamping bracket driving light for mounting on pipes. Select size in the menu.

Clamping bracket driving light for mounting on pipes.

Click here to see assembly instructions.

Protect your headlights and auxiliary lights now! Rock chips, insects, road salt and more get right into the front of your car as you drive. Every time a little rock lands on your headlights, auxiliary lights or LED ramp, they make a little impression. One mark doesn't do much for the light pattern, but anyone who's owned an older car knows what happens over time. You get a milky white, dingy surface that degrades light and by extension visibility. So don't compromise on safety, protect your headlights and auxiliary lights now!
Buy protective film that's both easy to install and replace. A must for all auxiliary lights and LED ramps!
The film is 0,4x1m and is 0,2mm thick.
For driving lights and LED ramps we recommend transparent protective film. Measure the length of the glass to determine how much you need. For a pair of normal headlights you need about 2m of protective film.
Available in Transparent, Smoke, Dark Smoke, Yellow, Red, Green, Light Blue and Blue.
<a href="/pub_docs/files/montering/montering_skyddsfilm.pdf" target="_blank">Click here to see assembly instructions.</a> (Swedish) 
<div class="embed-container"> </div>

Awesome film that is easy to assemble. This protective film is available in several different colours and fits most headlights, light bars, driving lights, rear lights or fog lights

Waterproof DT connector (female) which is ideal for auxiliary lamps / Ledbar in humid and weather exposed environments without having to worry. The female connector is usually mounted on the component that already has a male connector.

Tillbehör till XBB Dongle Power unit extraljusrelä OBD II
Kablage för att användas ihop med XBB OBD II kit (Dongle och Power Unit) och möjliggör att koppla in din LED-ramp eller dina extraljus ihop med XBB Dongle och Power Unit extraljusrelä, i de fall du har Xenon eller LED på ditt helljus. Din belysning tänds och släcks sedan när du slår på och av bilens helljus. Vilka bilmodeller som stödjs hittar du under produkten XBB Dongle OBD II.

✓ Reläkablage för XBB Dongle & Power Unit 
✓ Med utgångar: DT, DRL, kompletteringskablage 
✓ Avsedd för XBB OBDII kit

Manual

Canbus Smart interface adapter with signal outlet for high beam. Many new car models has HID/LED-headlights guided by Can-Bus that communicates with cars components digitally. Therefore this interface is needed to get an analog signal (12V) to driving light relay. This interface reads Can-bus High Beam guidance and convers signal to analog 12V+.
Interface fits most carmodels with HID or LED. We have application lists to most cars.

Canbus Smart interface which has signal outlet for detecting high beam activity. A must if you should assemble driving lights or LED bar on your car that has Can-bus.

Smart interface adapter with signal outlet for high beam. Many new carmodels has Bi-xenon headlights guided by Can/Lin-Bus that communicates with cars components digitally. Therebefore this interface is needed to get an analog signal (12V) to extralight relay that makes to lit extralight/or LED ramp. Fits only Volvos all models from 2017-

Can/Lin bus interface which has signal outlet for detecting high beam activity . A must if you should assemble extra lights or LED ramp on your car that has LED/Xenon headlights.

Fits only Volvos all models from 2017-.

Dimension: 580x90x50mm. Distance between Screw holes is 56mm

EMC interference filter for electro magnetic interference, eg. radio waves when you have a led bar or xenon upgrade your car.
Connects between ballast and 12v power. Price per pair.
DT connector

Stylish LED ramp holder to mount behind the reg. plate. This LED-ramp holder is made of steel and black powder coating.
Very neat mounting, good mounting possibilities thanks to the adjustable brackets.
2 fixing points. 483x95mm- CC: 515-567mm

Great LED ramp holder with adjustable brackets for a neat mounting of an LED ramp on your vehicle.

A professional cable set specifically designed for the Nordic climate, with insulating hoses to protect against dirt and moisture. The cable is easily adjusted in length by cutting it, and fits both DT2 and DT4. An 87A cable is also included, to connect position lights for example.

LED Bars - Accessories