Favourites

ABS-wheels

Air filters

Boot mats

Brake caliper paint

Driving lights

Gear knobs

H7 LED

Imaz IM5

Japan Racing

LED bars

Maxton Design

Ocean MK18

Poppy

Rims

Sport seats

Window tint

Wind deflectors

Popular products

Audi A4 B7

Audi A4 B8

Audi A6 4G

BMW E61

BMW E90/E91

BMW F10/F11

BMW F20/F21

BMW F30/F31

Volvo S60

Volvo V60

Volvo V70N 2000-2004

Volvo V70NN 2008-2016

Volvo XC60

VW Caddy

VW Golf 4

VW Golf 7

Popular cars

About us

Sustainability

This is SC Styling

Guides

Information

Products

Lighting deals 💡

Strands Lighting Divisions proffslampserie for dig som behöver det allra bästa, both vad gäller kvalité and ljusstyrka. Strongly recommended to both OEM and body builders of superstructures. Designed and tested during two years time, makes that we exceed all possible quality requirements.   With electromagnetic compability and a compact design the lamp is easily placed without taking too much space or disturbing your electronic equipment. Thanks to improvement of diodes you will get a powerful light that facilitates work, with a minimal electricity consuming.   With ownmade technique to anodize and paint, we can guarantee that lamp housing and inner parts are made of material of high quality, that protects against outer damage, as corrosion, mechanical damage and big temperature differences. Deutsch -contact with 2 meter cable not only makes assembly of lamp easier , but also guarantees a powerful isolation class , IP68. 12pcs Osram LED 62W 2,5m Cable. 10-33V Bracket is rotatable 120° Theoretical lumen: 5850 Actual lumen: 5400 110x159x85mm

Nice work light Pro with 12pcs Osram LED delivers in total  5850 Lumen

Specifikationer 9-32V, 220V 20W (Cree LED) Theoretical lumen: 1500 Actual lumen: 700 length: 132mm Height: 175mm Depth: 73mm cable length: ~2000mm Cigarette lighter plugs- and AC-adapter included IP67

33490605-Manual-SWE

33490605-Manual-ENG

Backlight Nano from Ledson offers a powerful lighting solution in an ultra-compact format. With a height of only 17 mm, this reverse light is discreet when mounted, yet delivers a bright light with a wide light pattern of 140°. It gives you excellent visibility behind the vehicle when reversing, while remaining barely visible when not in use.
This model is E-marked and approved according to ECE R23, which means that it meets all requirements for use as a reversing light. Nano is both stylish and functional, with a design that easily blends into the vehicle without compromising performance.
<h3>Specifications</h3>
<ul>
<li>E-marking: ECE R23 (approved as reversing light)</li>
<li>Range: 31 meters (1 lux)</li>
<li>Luminous flux: 2800 lumens (actual 1750 lumens)</li>
<li>Light distribution: 140° wide light pattern</li>
<li>Color temperature: 5000K</li>
<li>Power: 30W (6 x 5W LED)</li>
<li>IP class: IP68 (water and dustproof)</li>
<li>Electronic heat management to ensure long-lasting performance</li>
<li>Voltage: 9-36V (2A at 12V and 1A at 24V)</li>
<li>EMC-safe: ECE R10 for electromagnetic compatibility</li>
</ul>
<h3>Dimensions</h3>
<ul>
<li>Width: 86 mm</li>
<li>Height: 17mm (26mm with bracket)</li>
<li>Depth: 44 mm</li>
<li>Cable: 30 cm with 2-pin DT connector</li>
</ul>
Important: Do not cut the DT connector, as this may increase the risk of moisture damage and void the warranty. A DT connector (male) with joint is included.

The Nano reversing light from Ledson is a compact and powerful solution for optimal lighting when reversing. With its discreet design and wide light pattern of 140°, it offers excellent visibility without being visible when not in use. E-marked and approved according to ECE R23, with high water and dust resistance (IP68).

Produktblad

Manual

The Qube work lamp is one of the most compact and efficient solutions. Design and performance that completes the Siberia LED ramp in a sophisticated and powerful way. Qube provides a wide light distribution and is developed for, among other things, off-road driving in difficult terrain. Equipped with stylish position light in orange or white light. Lamp housing made of aluminum and glass in polycarbonate.

The small work light that gives you a powerful light!

Ett professionellt ADR-godkänt arbetsljus för dig som kräver det absolut bästa, både när det kommer till kavlite och prestanda. Lampan rekommenderas starkt till påbyggare och originalutrustningstillverkare. Arbetslampans robusta och kompakta konstruktion ger dig imponerande 2400 teoretiska lumen och en bred ljusbild.

FYND- Tidigare använd som en demo exemplar En kraftfull arbetslampa som trots sin slanka design levererar smått otroliga 5200 lumen. Med temperaturkontrollsystem En slank liten arbetslampa från Strands Lighting Division som levererar grymt mycket ljus. Med det inbyggda temperaturkontrollsystemet kan du vara säker på att lampan inte överhettar.

Klick here to see product data sheet from  Strands Lighting Division

<div id="ctl00_main_ctl00_ctl00_tabContent_body" class="ajax__tab_body">
<div id="ctl00_main_ctl00_ctl00_tabContent_pnlProductDescription" class="ajax__tab_panel">
<div id="ctl00_main_ctl00_ctl00_tabContent_pnlProductDescription_productDescription" class="description">
Lamp comes with a in-built DT-connector , has an ETM-system (Electronic Thermal Management), and approved according ECE R10 and CISPR25 class 4.
Heat lens a snowmelting and anti-ice system
Heat lens prevents snow and ice on lamp.
If lamp is used when it is -25°C, and has 5mm ice on lense. If the heatfunction is put on the lens temperature will be -18°C after a minute, -1°C after five minutes, 15°C after ten minutes and it reaches the highest temperatue 68°C after an hour. <a href="https://www.scstyling.com/pub_docs/files/Manualer/809021.pdf">Klick here to see product data sheet from Strands Lighting Division</a>
ECE R10
IP68 5400 Theoretical lumen 4752 Actual lumen 40 Watt
Dimensions 120x106x65mm
</div>
</div>
</div>
9-36V 135mm cable

This solid worklight with patented heat lens technic prevents snow and ice building on lamp

Number of LEDs 10, 1600 LM Material Lens: PC, housing: AL Screw for mounting Function work light, flood Watt 15 W Voltage 12 V/24 V Certifications ECE R10 Size: 88x41x48 mm Cord 250 mm Weight: 0,28 kg

Number of LEDs10, 1500 LM Material Lens: PC, housing: AL Screw for mounting Function work light Watt 15 W Voltage 12 V/24 V Certifications ECE R10 Size: 101x101x36 mm IP67 Cable 250 mm Weight: 0,46 kg

Number of LEDs 12, 1800 LM Material Lens: PC, housing: AL Screw for mounting Function work light, flood Watt 12 W Voltage 12 V/24 V Certifications ECE R10 Size: 77x45x77 mm IP67 Cable 250 mm Weight: 0.26 kg

Number of LEDs 12, 1440 LM Material Lens: PC, housing: AL Screw for mounting Function work light, flood Watt 25 W Voltage 12 V/24 V Certifications ECE R10 Cable 4000 mm Weight: 0.53 kg

Number of LEDs 16, 1600 LM Material Lens: PC, housing: AL Screw for mounting Function work light, flood Watt 20 W Voltage 12 V/24 V Certifications ECE R10 Size: 101x101x37 mm IP67 Cable 250 mm Weight: 0,49 kg

Number of LEDs 16, 2565 LM Material Lens: PC, housing: AL Screw for mounting Function work light, flood Watt 48 W Voltage 12 V/24 V Certifications ECE R10 Size: 110x44x110 mm Cable250 mm Weight: 0.60 kg

Number of LEDs 5, 500 LM Material Lens: PC, housing: AL Screw for mounting Function work light, flood Watt 14 W Voltage 12 V/24 V Certifications ECE R10 Size: 108x36x108 mm Cable 400 mm Weight: 0.41 kg

Number of LEDs 6, 570 LM Material Lens: PC, housing: AL Screw for mounting Function work light, flood Watt 15 W Voltage 12 V/24 V Certifications ECE R10 Size: 118x35x118 mm Cable 400 mm Weight: 0.41 kg

Number of LEDs 6, 826 LM Material Lens: PC, housing: AL Screw for mounting Function work light, flood Watt 16 W Voltage 12 V/24 V Certifications ECE R10 Size: 170.8x50x28 mm Cable 250 mm Weight: 0.26 kg

Number of LEDs 6, 1200 LM Material Lens: PC, housing: AL Screw for mounting Function work light, spot Watt 18 W Voltage 12 V/24 V Certifications ECE R10 Size: 159.86 x 62.53 x 44.9 mm IP 67 Cable 250 mm Weight: 0.42 kg

Number of LEDs 6, 1680 LM Material Lens: PC, housing: AL Screw for mounting Function work light, flood Watt 18 W Voltage 12 V/24 V Certifications ECE R10 Cord 4000 mm Weight: 0.35 kg

Work lights