Favourites

ABS-wheels

Air filters

Boot mats

Brake caliper paint

Driving lights

Gear knobs

H7 LED

Imaz IM5

Japan Racing

LED bars

Maxton Design

Ocean MK18

Poppy

Rims

Sport seats

Window tint

Wind deflectors

Popular products

Audi A4 B7

Audi A4 B8

Audi A6 4G

BMW E61

BMW E90/E91

BMW F10/F11

BMW F20/F21

BMW F30/F31

Volvo S60

Volvo V60

Volvo V70N 2000-2004

Volvo V70NN 2008-2016

Volvo XC60

VW Caddy

VW Golf 4

VW Golf 7

Popular cars

About us

Sustainability

This is SC Styling

Information

Products

Give your ride a new look with Maxton Design 

4-pack white Round reflexes With tape. Dimension: Ø60mm E-mark approved

4-pack white Round reflexes with holes. Dimension: Ø60mm E-mark approved

4-pack white round reflexes that is attached with M6-screws. Dimension: Ø85mm E-mark approved

Classical rotorlight with LED diodes, this model is for pole mounting. This modek is 210mm high and diameter is on 128mmThis light works with 12-24V. ECE-R65 approved. Three different flashpatterns to choose from, flashpattern changes under glass see picture, 
<div class="cssArtItemDescrLong cssTblTxtByClr">
10W IP56.
</div>

Classical rotating light with LED diodes, this model is with magnet (manages 110km/h) This model is only 130mm high and diameter is on 128mm. This light works with 12-24V. ECE-R65 approved. Three different flashpatterns to choose from, flashpattern changes under glass see picture. 
<div class="cssArtItemDescrLong cssTblTxtByClr">
10W IP65.
</div>

Med Safe Wheels hjulmuttersäkring kan du känna dig trygg i att dina muttrar håller sig på plats. Den uppfyller nämligen EU:s direktiv för skydd mot utstickande muttrar! Kom ihåg att efterdra dina muttrar en gång innan du monterar dina Safe Wheels. Kan återanvändas 2-3 gånger så att du inte behöver köpa nya varje gång de demonteras.

Skydda dig och dina medtrafikanter genom att förhindra dina hjulmuttrar från att skruvas upp. Finns i flera olika färger.

Smidiga skyddshandskar i storlek XL i mörkgrön färg.

En tålig och praktisk skyddsmask EN143:2000/405:2001 CEO121

Specifications 10-30V DC 18W IP67 E-mark approved Length: 125mm Height: 62mm Width: 97mm Height inc. Bracket: 124mm Cable length: 1900mm

E-mark approved Flashlight 10-30V that shines orange (120 flash/minute)

Specifications 12-24V DC 7,3W IP66/68 E-mark approved Length: 146,5mm Height: 32,8mm Width: 50mm Cable length: 2450mm

E-mark approved reversing light 12-24V that shines with 7 different flashpattern. made of high qualitative polycarbonate and emits no electromagnetical disturbance

Good strobe light that fulfils ECE/R65 and E-mark approved
plane mounting.
Possible to sync several units after eachother.
MultiVoltage 10-30V.
Polycarbonate lense. Black painted aluminium housing.
IP67 classified. CE. Fulfils EMC directives 89/336/EEC and 95/54. Dimension: LxHxD 143x110x46mm.

Nice rectangular strobe light 10-30V with clear glass that flashes orange, This is  for plane mounting

A totally fantastic strobe ramp from Strands that is modulebased and adjustable for all cars. This ramp has in total 11 different flash patterns. Of course E-mark approved MultiVoltage: 10-30V IP67 classified Dimensions from 467mm ECER10/R65 Class 2 approved <ifronte fronteborder="0" height="350" src="https://www.youtube.com/embed/yJQvnjDru-M" width="425"></ifronte>

Led warning light ramp with 11 different flash patterns, 10-30V from  467mm IP67 and ECER10/R65 Klass 2

This clear glass, compact ‘Hide-Away’ LED strobe/flash light is perfect for recessed mounting. Despite its small size, it provides an incredibly bright and clear light. The light is R65 approved, which means it can be used on public roads (not the red version). Supplied with a 2 metre long cable.
The strobe light is easily installed in a 25.4 mm (1 inch) hole using the supplied rubber gasket. First, the rubber seal is pressed into the hole, then the lamp is put in place and snapped into place. The mounting depth is 40 mm.
A detailed manual with installation instructions is included.
The lamp has 16 different flash patterns (14 for orange and red), and you can group the lights into two separate groups so that they flash alternately (e.g. right/left or top/bottom). Orange and red also support alternating flashing.
Wiring instructions:
The lamps are easily connected as normal lamps with red and black cable for plus and minus:
<ul>
<li>Red = Plus (12V-24V)</li>
<li>Black = Minus/earth</li>
<li>Yellow = For synchronisation, flash patterns and grouping</li>
<li>White = Alternating flash pattern (only for orange and red)</li>
</ul>
To change the flash pattern, connect the yellow wire to positive, and if you give three quick pulses on positive, the pattern is reset to the first one. A built-in memory function allows the lamp to remember the last pattern used.
Grouping:
Connect both red and yellow wires to plus to activate grouping. The light will flash once or twice to show the set group. To change the group, connect the yellow wire to the plus. The lamp remembers the setting when it is switched off.
Dimensions:
<ul>
<li>Diameter (including gasket): 36 mm</li>
<li>Hole size: 25,4 mm</li>
<li>Total length: 38 mm</li>
<li>Mounting depth: 45 mm (including cable space)</li>
<li>Cable length: 2 metres</li>
</ul>
Specifications:
<ul>
<li>Voltage range: 10-33V</li>
<li>16 flash patterns (14 for orange and red)</li>
<li>ECE R65 and ECE R10 approved (R65 does not apply to red)</li>
<li>IP67 rated (water and dust proof)</li>
<li>Equipped with 4 LED lights</li>
</ul>
Also available in the colours:
<ul>
<li>White (art. no. 5002311)</li>
<li>Red (art. no. 5002312)</li>
<li>Blue (art. no. 500134)</li>
</ul>

Hide-away LED Flash Light
<ul>
<li>Mounts in a 25.4mm hole</li>
<li>Cable length 2m</li>
<li>16 different flash patterns</li>
<li>ECE R65 and ECE R10 (ECE R65 does not apply to red)</li>
</ul>

This clear glass, compact “Hide-Away” LED strobe/flash light is perfect for recessed mounting. Despite its small size, it provides an incredibly bright and clear light. The light is R65 approved, which means it can be used on public roads (not the red version). Supplied with a 250mm long cable.
The strobe light is easily installed in a 25.4mm (1 inch) hole using the supplied rubber gasket. First the rubber seal is pressed into the hole, then the lamp is put in place and snapped into place. The mounting depth is 40 mm.
A detailed manual with installation instructions is included.
The lamp has 16 different flash patterns (14 for orange and red), and you can group the lights into two separate groups so that they flash alternately (e.g. right/left or top/bottom). Orange and red also support alternating flashing.
Wiring instructions:
The lamps are easily connected as normal lamps with red and black cable for plus and minus:
<ul>
<li>Red = Plus (12V-24V)</li>
<li>Black = Minus/ground</li>
<li>Yellow = For synchronization, flash patterns and grouping</li>
<li>White = Alternating flash pattern (only for orange and red)</li>
</ul>
To change the flash pattern, connect the yellow wire to the plus, and if you give three quick pulses on the plus, the pattern is reset to the first one. A built-in memory function allows the lamp to remember the last pattern used.
Grouping:
Connect both red and yellow wires to plus to activate grouping. The light will flash once or twice to show the set group. To change the group, connect the yellow wire to the plus. The lamp will remember the setting when it is turned off.
Dimensions:
<ul>
<li>Diameter (including gasket): 35 mm</li>
<li>Hole size: 25,4 mm</li>
<li>Total length: 39 mm</li>
<li>Mounting depth: 40mm (including cable space)</li>
<li>Cable length: 250mm</li>
</ul>
Specifications:
<ul>
<li>Voltage range: 10-33V</li>
<li>16 flash patterns (14 for orange and red)</li>
<li>ECE R65 and ECE R10 approved (R65 does not apply to red)</li>
<li>IP67 rated (water and dust proof)</li>
<li>Equipped with 3 LED lights</li>
</ul>
Also available in the colors:
<ul>
<li>Red (art. no. 5002312)</li>
<li>Orange (art. no. 5002313)</li>
<li>White (art. no. 5002311)</li>
</ul>

Hide-away LED Flash Light
<ul>
<li>Mounts in a 25.4mm hole</li>
<li>Cable length 250mm</li>
<li>16 different flash patterns</li>
<li>ECE R65 and ECE R10 (ECE R65 does not apply to red)</li>
</ul>

This clear glass, compact “Hide-Away” LED strobe/flash light is perfect for recessed mounting. Despite its small size, it provides an incredibly bright and clear light. The light is R65 approved, which means it can be used on public roads (not the red version). Supplied with a 2 meter long cable.
The strobe light is easily installed in a 25.4 mm (1 inch) hole using the supplied rubber gasket. First, the rubber seal is pressed into the hole, then the lamp is put in place and snapped into place. The mounting depth is 40 mm.
A detailed manual with installation instructions is included.
The lamp has 16 different flash patterns (14 for orange and red), and you can group the lights into two separate groups so that they flash alternately (e.g. right/left or top/bottom). Orange and red also support alternating flashing.
Wiring instructions:
The lamps are easily connected as normal lamps with red and black cable for plus and minus:
<ul>
<li>Red = Plus (12V-24V)</li>
<li>Black = Minus/ground</li>
<li>Yellow = For synchronization, flash patterns and grouping</li>
<li>White = Alternating flash pattern (only for orange and red)</li>
</ul>
To change the flash pattern, connect the yellow wire to positive, and if you give three quick pulses on positive, the pattern is reset to the first one. A built-in memory function allows the lamp to remember the last pattern used.
Grouping:
Connect both red and yellow wires to plus to activate grouping. The light will flash once or twice to show the set group. To change the group, connect the yellow wire to the plus. The lamp will remember the setting when it is turned off.
Dimensions:
<ul>
<li>Diameter (including gasket): 36 mm</li>
<li>Hole size: 25,4 mm</li>
<li>Total length: 38 mm</li>
<li>Mounting depth: 45 mm (including cable space)</li>
<li>Cable length: 2 meters</li>
</ul>
Specifications:
<ul>
<li>Voltage range: 10-33V</li>
<li>16 flash patterns (14 for orange and red)</li>
<li>ECE R65 and ECE R10 approved (R65 does not apply to red)</li>
<li>IP67 rated (water and dust proof)</li>
<li>Equipped with 4 LED lights</li>
</ul>
Also available in the colors:
<ul>
<li>White (art. no. 5002311)</li>
<li>Orange (art. no. 5002313)</li>
<li>Blue (art. no. 500134)</li>
</ul>

This clear glass, compact “Hide-Away” LED strobe/flash light is perfect for recessed mounting. Despite its small size, it provides an incredibly bright and clear light. The light is R65 approved, which means it can be used on public roads (not the red version). Supplied with a 2 meter long cable.
The strobe light is easily installed in a 25.4 mm (1 inch) hole using the supplied rubber gasket. First, the rubber seal is pressed into the hole, then the lamp is put in place and snapped into place. The mounting depth is 40 mm.
A detailed manual with installation instructions is included.
The lamp has 16 different flash patterns (14 for orange and red), and you can group the lights into two separate groups so that they flash alternately (e.g. right/left or top/bottom). Orange and red also support alternating flashing.
Wiring instructions:
The lamps are easily connected as normal lamps with red and black cable for plus and minus:
Red = Plus (12V-24V) Black = Minus/ground Yellow = For synchronization, flash patterns and grouping White = Alternating flash pattern (only for orange and red)
To change the flash pattern, connect the yellow wire to positive, and if you give three quick pulses on positive, the pattern is reset to the first one. A built-in memory function allows the lamp to remember the last pattern used.
Grouping:
Connect both red and yellow wires to plus to activate grouping. The light will flash once or twice to show the set group. To change the group, connect the yellow wire to the plus. The lamp will remember the setting when it is turned off.
Dimensions:
Diameter (including gasket): 36 mm Hole size: 25,4 mm Total length: 38 mm Mounting depth: 45 mm (including cable space) Cable length: 2 meters
Specifications:
Voltage range: 10-33V 16 flash patterns (14 for orange and red) ECE R65 and ECE R10 approved (R65 does not apply to red) IP67 rated (water and dust proof) Equipped with 4 LED lights
Also available in the colors:
Red (art. no. 5002312) Orange (art. no. 5002313)
Blue (art. no. 500134)

Hide-away LED Flash Light
Mounts in a 25.4mm hole Cable length 2m 16 different flash patterns ECE R65 and ECE R10 (ECE R65 does not apply to red)

A practical disposable coverall to carry in your car or truck to protect your regular clothes in case something happens. Only available in size XL and in dark blue

Safety