Favourites

ABS-wheels

Air filters

Boot mats

Brake caliper paint

Driving lights

Gear knobs

H7 LED

Imaz IM5

Japan Racing

LED bars

Maxton Design

Ocean MK18

Poppy

Rims

Sport seats

Window tint

Wind deflectors

Popular products

Audi A4 B7

Audi A4 B8

Audi A6 4G

BMW E61

BMW E90/E91

BMW F10/F11

BMW F20/F21

BMW F30/F31

Volvo S60

Volvo V60

Volvo V70N 2000-2004

Volvo V70NN 2008-2016

Volvo XC60

VW Caddy

VW Golf 4

VW Golf 7

Popular cars

About us

Sustainability

This is SC Styling

Guides

Information

Products

15% off extra lights and LED bars | Compete and win a gift card 🔥

A powerful strobe with 3 pcs 3W LED that fulfils ECE/R65 and are E-mark approved . There are 12 different flash patterns to choose on. Possible to sync several units after eachother. 29x98x41mm
<div class="cssArtItemDescrLong cssTblTxtByClr">
Multivoltage so it works on 12 and 24V.
<ul>
<li>Easy to connect. Red to plus . Black to minus.</li>
<li>White connected with plus if you want to regroup many flashligts to flash simultaniously</li>
<li>Yellow gives more positive current in a second to go to next frequency .</li>
<li>Yellow must be connected together with all flashlights that you want to sync.</li>
<li>before sync all should have same flash frequency.</li>
</ul>
Dimension: 29x98x41mm
</div>

Nice LED strobe that flashes orange with 3 pcs highpower LED.

12-24V DC 9W IP68 E-mark approved Length: 75,5mm Height: 10mm Width: 28,1mm Cable length: 2000mm

Nice strobe blue 12-24V, 12 different flash patterns. E-mark approved.

ECE/R65 Klass 2-approved Specifications 12-24V DC 18W IP68 E-mark approved Length: 113mm Height: 9,9mm Width: 28,4mm Cable length: 2000mm

Nice strobe blue 12-24V, 20 different flash patterns. E-mark approved.

12-24V DC 18W IP66/68 E-mark approved Length: 113mm Height: 9,2mm Width: 29mm Cable length: 2000mm

Nice strobe orange 12-24V, 20 different flash patterns. E-mark approved.

A powerful strobe with 3 pcs 3W LED that fulfils ECE/R10 and are E-mark approved . There are 12 different flash patterns to choose on..
Possible to sync several units after eachother.
ECE/R10 approved, E-mark approved. Included also 50cm cable. works for both 12V and 24V. Connection: 
<ul>
<li>Easy to connect. Red to plus. Black to minus.</li>
<li>White connected with plus if you want to regroup many flashligts to flash simultaniously</li>
<li>Yellow gives more positive current in a second to go to next frequency .</li>
<li>Yellow must be connected together with all flashlights that you want to sync.</li>
<li>before sync all should have same flash frequency.</li>
</ul>
ATTN! These should not be tested or run by batterycharger

Nice strobe with 3 LED, flashes blue 12-24V, 12 different flash patterns.

A powerful strobe with 4 pcs 3W LED that fulfils ECE/R10 and are E-mark approved . There are 19 different flashpattens to choose from.
Possible to sync several units after eachother.
ECE/R10 approved, E-mark approved. Included also 50cm cable. works for both 12V and 24V. Connection: 
<ul>
<li>Easy to connect. Red to plus. Black to minus.</li>
<li>White connected with plus if you want to regroup many flashligts to flash simultaniously</li>
<li>Yellow gives more positive current in a second to go to next frequency .</li>
<li>Yellow must be connected together with all flashlights that you want to sync.</li>
<li>before sync all should have same flash frequency.</li>
</ul>
ATTN! These should not be tested or run by batterycharger

Nice strobe with 4 LED, flashes Red 12-24V, 19 different flash patterns

Our new led warning light ramp that fulfils ECE/R65.
Nice and easily assembled ramp that delivered complete with brackets and control panel. LED units al the way round gives good attention value no matter what angle.
The brackets that are included makes assembly possible on most passanger cars/ trucks On cars with droplist the stainless steel clamp that is included is used on roof assembly.
Trucks with roofbar can use pipe clamp AL07 for bar or bolt through feet. There are many accessoiries to roof bars that facilitates assembly.
Clear transparent lense. Grey anodized aluminium.
Quantity LEDS/Length.
34LED     480mm Suction cup magnet, feet and cigarette lighter socket cables.
66LED     900mm Complete barckets, cables and control panel
82LED   1200mm Complete barckets, cables and control panel
98LED   1440mm Complete barckets, cables and control panel
130LED 1920mm Complete barckets, cables and control panel
 15 different flash patterns. IP65. Width 225mm Height incl foot:115mm

Nice LED roof ramp that flashes with orange light.
Choose length in droplist these  ramper finns i olika Lengther!

Nice roof ramp with LED warninglight in orange flashes Powered with electricity from cigarette lighter socket 12-24V. IP 56 classified andE-mark approved according R10. 8 different flash patterns. Manages max 120km/h. Dimension: 416 x 80 x 280mm 30W

Noce simple LED warninglight bar orange flashes

Strands Yeti side shooter är en kombinerad arbetslampa/varningsljus. När varningsljusfunktionen är avstängd används utrymmet för att skjuta ut ljuset brett istället. Med en flexibel design och justerbara fästen är lampan enkel att montera på de allra flesta fordon. Yeti har en automatisk värmelins som startar vid tre grader och stängs av när önskad temperatur är nådd. Värmefunktionen gör Yeti perfekt anpassad för montering bak på lastbilar där lamporna utsätts för stora mängder snö och is. Om man vill använda denna LED-ramp/Arbetsljus som ett extraljus måste man tänka på att: Om du har en bil med Xenon eller LED på helljuset så kommer du att behöva ett Canbus Interface med artikelnummer 279900P. När du köper en komplett sats så ingår reläsats och hållare som monteras bakom nummerskylten.

A combined work light and warning light in the shape of a LED bar. Groundbreaking design and function from Strands Lighting Division.

Light bar with 12V with 2 beacons and 2 Extra lights! dimensions 1000 mm wide, 108 mm high.

Roof light bar with both rotor and Extra lights!

Light bar with 24V med 2 rotorer and 2 Extra lights! dimensions 1000 mm wide, 108 mm high.

24V Light bar with two beacons! Dimensions 40x17cm

Light bar on 24V with  2 beacons! Dimensions 1228 mm wide, 138 mm high.

Light bar on 24V with  2 beacons and 6 extra lights! dimensions 1372 mm wide, 108 mm high.

Lightbar with 2 beacons and 6 pcs extralights!

12 volt lightbar with 2 pcs rotorlights and 2 pcs flashlights, This model is 1372mm wide.

Stylish lightramp with 2 pcs rotorlights and 2 pcs flashlights, this model is 1372mm wide.

Red glass for <a href="/belysning/Warning light/rotating-led-ljus-takmontage">809056</a> and <a href="/belysning/Warning light/rotating-led-ljus-magnet-">809058</a>.

Classical rotating beacon with LED lamp , this model is prepared for assembly on pole This model is 217mm high and diameter is on 148mm. This light works with 12-24V. ECE-R65 approved.

Rotating Beacon in LED! This model measures 217mm on height on 148mm.12-24V

Specifications 12-24V 30W IP56 E-mark approved Diameter: 140mm Height: 130mm

Classical rotorlight with LED diodes, this model is for pole mounting. This modek is 210mm high and diameter is on 128mmThis light works with 12-24V. ECE-R65 approved. Three different flashpatterns to choose from, flashpattern changes under glass see picture, 
<div class="cssArtItemDescrLong cssTblTxtByClr">
10W IP56.
</div>

Classical rotating LED-light , this model is prepared with magnet and cigarette lighter socket. This model is 183mm high and diameter is on 142mm. This light works with 12-24V. ECE-R65 approved. 
<div class="cssArtItemDescrLong cssTblTxtByClr">
20W IP65.
</div>

Beaconlight in LED! This model measures 183mm on height on a diameter on 142mm. 12-24V

Classical rotating light with LED diodes, this model is with magnet (manages 110km/h) This model is only 130mm high and diameter is on 128mm. This light works with 12-24V. ECE-R65 approved. Three different flashpatterns to choose from, flashpattern changes under glass see picture. 
<div class="cssArtItemDescrLong cssTblTxtByClr">
10W IP65.
</div>

Classical rotating LED-light , this model is prepared with magnet and cigarette lighter socket. This model measures 169mm on height a diameter on 148mm. This light works with 12-24V ECE-R65 approved.

Rotating light in LED! This model measures 169mm on height a diameter on 148mm. 12-24V

Classical Orange Rotating light in clar glass with LED diodes, this model is for roof assembly. This model is 183mm high and diameter is on 142mm. This light works with 12-24V. ECE-R65 approved. Three different flashpatterns to choose from, flashpattern changes under glass see picture. Assembled with three screws in bottom.
<div class="cssArtItemDescrLong cssTblTxtByClr">
20W IP65.
</div>

Strobe lights