Favourites

ABS-wheels

Air filters

Boot mats

Brake caliper paint

Driving lights

Gear knobs

H7 LED

Imaz IM5

Japan Racing

LED bars

Maxton Design

Ocean MK18

Poppy

Rims

Sport seats

Window tint

Wind deflectors

Popular products

Audi A4 B7

Audi A4 B8

Audi A6 4G

BMW E61

BMW E90/E91

BMW F10/F11

BMW F20/F21

BMW F30/F31

Volvo S60

Volvo V60

Volvo V70N 2000-2004

Volvo V70NN 2008-2016

Volvo XC60

VW Caddy

VW Golf 4

VW Golf 7

Popular cars

About us

Sustainability

This is SC Styling

Guides

Information

Products

Lighting deals 💡

This clear glass, compact “Hide-Away” LED strobe/flash light is perfect for recessed mounting. Despite its small size, it provides an incredibly bright and clear light. The light is R65 approved, which means it can be used on public roads (not the red version). Supplied with a 250mm long cable.
The strobe light is easily installed in a 25.4mm (1 inch) hole using the supplied rubber gasket. First the rubber seal is pressed into the hole, then the lamp is put in place and snapped into place. The mounting depth is 40 mm.
A detailed manual with installation instructions is included.
The lamp has 16 different flash patterns (14 for orange and red), and you can group the lights into two separate groups so that they flash alternately (e.g. right/left or top/bottom). Orange and red also support alternating flashing.
Wiring instructions:
The lamps are easily connected as normal lamps with red and black cable for plus and minus:
<ul>
<li>Red = Plus (12V-24V)</li>
<li>Black = Minus/ground</li>
<li>Yellow = For synchronization, flash patterns and grouping</li>
<li>White = Alternating flash pattern (only for orange and red)</li>
</ul>
To change the flash pattern, connect the yellow wire to the plus, and if you give three quick pulses on the plus, the pattern is reset to the first one. A built-in memory function allows the lamp to remember the last pattern used.
Grouping:
Connect both red and yellow wires to plus to activate grouping. The light will flash once or twice to show the set group. To change the group, connect the yellow wire to the plus. The lamp will remember the setting when it is turned off.
Dimensions:
<ul>
<li>Diameter (including gasket): 35 mm</li>
<li>Hole size: 25,4 mm</li>
<li>Total length: 39 mm</li>
<li>Mounting depth: 40mm (including cable space)</li>
<li>Cable length: 250mm</li>
</ul>
Specifications:
<ul>
<li>Voltage range: 10-33V</li>
<li>16 flash patterns (14 for orange and red)</li>
<li>ECE R65 and ECE R10 approved (R65 does not apply to red)</li>
<li>IP67 rated (water and dust proof)</li>
<li>Equipped with 3 LED lights</li>
</ul>
Also available in the colors:
<ul>
<li>Red (art. no. 5002312)</li>
<li>Orange (art. no. 5002313)</li>
<li>White (art. no. 5002311)</li>
</ul>

Hide-away LED Flash Light
<ul>
<li>Mounts in a 25.4mm hole</li>
<li>Cable length 250mm</li>
<li>16 different flash patterns</li>
<li>ECE R65 and ECE R10 (ECE R65 does not apply to red)</li>
</ul>

This clear glass, compact “Hide-Away” LED strobe/flash light is perfect for recessed mounting. Despite its small size, it provides an incredibly bright and clear light. The light is R65 approved, which means it can be used on public roads (not the red version). Supplied with a 2 meter long cable.
The strobe light is easily installed in a 25.4 mm (1 inch) hole using the supplied rubber gasket. First, the rubber seal is pressed into the hole, then the lamp is put in place and snapped into place. The mounting depth is 40 mm.
A detailed manual with installation instructions is included.
The lamp has 16 different flash patterns (14 for orange and red), and you can group the lights into two separate groups so that they flash alternately (e.g. right/left or top/bottom). Orange and red also support alternating flashing.
Wiring instructions:
The lamps are easily connected as normal lamps with red and black cable for plus and minus:
<ul>
<li>Red = Plus (12V-24V)</li>
<li>Black = Minus/ground</li>
<li>Yellow = For synchronization, flash patterns and grouping</li>
<li>White = Alternating flash pattern (only for orange and red)</li>
</ul>
To change the flash pattern, connect the yellow wire to positive, and if you give three quick pulses on positive, the pattern is reset to the first one. A built-in memory function allows the lamp to remember the last pattern used.
Grouping:
Connect both red and yellow wires to plus to activate grouping. The light will flash once or twice to show the set group. To change the group, connect the yellow wire to the plus. The lamp will remember the setting when it is turned off.
Dimensions:
<ul>
<li>Diameter (including gasket): 36 mm</li>
<li>Hole size: 25,4 mm</li>
<li>Total length: 38 mm</li>
<li>Mounting depth: 45 mm (including cable space)</li>
<li>Cable length: 2 meters</li>
</ul>
Specifications:
<ul>
<li>Voltage range: 10-33V</li>
<li>16 flash patterns (14 for orange and red)</li>
<li>ECE R65 and ECE R10 approved (R65 does not apply to red)</li>
<li>IP67 rated (water and dust proof)</li>
<li>Equipped with 4 LED lights</li>
</ul>
Also available in the colors:
<ul>
<li>White (art. no. 5002311)</li>
<li>Orange (art. no. 5002313)</li>
<li>Blue (art. no. 500134)</li>
</ul>

Hide-away LED Flash Light
<ul>
<li>Mounts in a 25.4mm hole</li>
<li>Cable length 2m</li>
<li>16 different flash patterns</li>
<li>ECE R65 and ECE R10 (ECE R65 does not apply to red)</li>
</ul>

This clear glass, compact “Hide-Away” LED strobe/flash light is perfect for recessed mounting. Despite its small size, it provides an incredibly bright and clear light. The light is R65 approved, which means it can be used on public roads (not the red version). Supplied with a 2 meter long cable.
The strobe light is easily installed in a 25.4 mm (1 inch) hole using the supplied rubber gasket. First, the rubber seal is pressed into the hole, then the lamp is put in place and snapped into place. The mounting depth is 40 mm.
A detailed manual with installation instructions is included.
The lamp has 16 different flash patterns (14 for orange and red), and you can group the lights into two separate groups so that they flash alternately (e.g. right/left or top/bottom). Orange and red also support alternating flashing.
Wiring instructions:
The lamps are easily connected as normal lamps with red and black cable for plus and minus:
Red = Plus (12V-24V) Black = Minus/ground Yellow = For synchronization, flash patterns and grouping White = Alternating flash pattern (only for orange and red)
To change the flash pattern, connect the yellow wire to positive, and if you give three quick pulses on positive, the pattern is reset to the first one. A built-in memory function allows the lamp to remember the last pattern used.
Grouping:
Connect both red and yellow wires to plus to activate grouping. The light will flash once or twice to show the set group. To change the group, connect the yellow wire to the plus. The lamp will remember the setting when it is turned off.
Dimensions:
Diameter (including gasket): 36 mm Hole size: 25,4 mm Total length: 38 mm Mounting depth: 45 mm (including cable space) Cable length: 2 meters
Specifications:
Voltage range: 10-33V 16 flash patterns (14 for orange and red) ECE R65 and ECE R10 approved (R65 does not apply to red) IP67 rated (water and dust proof) Equipped with 4 LED lights
Also available in the colors:
Red (art. no. 5002312) Orange (art. no. 5002313)
Blue (art. no. 500134)

Hide-away LED Flash Light
Mounts in a 25.4mm hole Cable length 2m 16 different flash patterns ECE R65 and ECE R10 (ECE R65 does not apply to red)

LED Beacon light Orange for fixed assembly, this is maybe markets most affordable Beacon light! with in total 7 different flaspatterns IP 68 classified, this model is similar to Hellas K-LED beacon light but with a better price! Fixed assembly Diameter 162 mm, Height 110mm.

Nice LED Beacon light Orange fixed assembly LED 12-24V

Nice strobe in Orange model with clear glass, these are clear when not used and to flash orange when beeing useds. You can choose 11 different flash patterns. Possible to sync several units after eachother. ECE/R65 approved, E-mark approved. Included also 50cm cable. works for both 12V and 24V. Connection: 
<ul>
<li>Easy to connect. Red to plus. Black to minus.</li>
<li>White connected with plus if you want to regroup many flashligts to flash simultaniously</li>
<li>Yellow gives more positive current in a second to go to next frequency .</li>
<li>Yellow must be connected together with all flashlights that you want to sync.</li>
<li>before sync all should have same flash frequency.</li>
</ul>
ATTN! These should not be tested or run by batterycharger

Nice strobe with 3 LED, flashes orange 12-24V, 11 different flash patterns

12-24V DC 9W IP68 E-mark approved Length: 75,5mm Height: 10mm Width: 28,1mm Cable length: 2000mm

Nice strobe orange 12-24V, 12 different flash patterns. E-mark approved.

ECE/R65 Klass 2-approved Specifications 12-24V DC 18W IP68 E-mark approved Length: 113mm Height: 9,9mm Width: 28,4mm Cable length: 2000mm

Nice strobe orange 12-24V, 20 different flash patterns. E-mark approved.

A powerful strobe with 3 pcs 3W LED that fulfils ECE/R10 and are E-mark approved . There are 12 different flash patterns to choose on..
Possible to sync several units after eachother.
ECE/R10 approved, E-mark approved. Included also 50cm cable. works for both 12V and 24V. Connection: 
<ul>
<li>Easy to connect. Red to plus. Black to minus.</li>
<li>White connected with plus if you want to regroup many flashligts to flash simultaniously</li>
<li>Yellow gives more positive current in a second to go to next frequency .</li>
<li>Yellow must be connected together with all flashlights that you want to sync.</li>
<li>before sync all should have same flash frequency.</li>
</ul>
ATTN! These should not be tested or run by batterycharger

Nice strobe with 3 LED, flashes white 12-24V, 12 different flash patterns

Classical rotorlight with LED diodes, this model is for pole mounting. This model is 235mm high and diameter is on 128mm. This light works with 12-24V. ECE-R65 approved. Three different flashpatterns to choose from, flashpattern changed under glass see picture, clamped together on pole 24mm diameter, DIN-contact. 
<div class="cssArtItemDescrLong cssTblTxtByClr">
20W IP65.
</div>
<ifronte fronteborder="0" height="315" src="https://www.youtube.com/embed/bVBfXoXh1WE" width="420"></ifronte>

Rotating LED! This model has 235mm on height and a diameter on 128mm. 12-24V

Classical Beacon with LED diodes! This model is for surface mounting. This model is only 140mm high and diameter is on 210mm. This light works with 12-24V. ECE-R65 approved. Three different flashpatterns to choose from, flashpattern changes under glass see picture, 
<div class="cssArtItemDescrLong cssTblTxtByClr">
10W IP65.
</div>

A powerful strobe with 4 pcs 3W LED that fulfils ECE/R10 and are E-mark approved. There are 19 different flashpattens to choose from.
Possible to sync several units after each other.
ECE/R10 approved, E-mark approved. Included also 50cm cable. works for both 12V and 24V. Connection: 
<ul>
<li>Easy to connect. Red to plus. Black to minus.</li>
<li>White connected with plus if you want to regroup many flashligts to flash simultaniously</li>
<li>Yellow gives more positive current in a second to go to next frequency.</li>
<li>Yellow must be connected together with all flashlights that you want to sync.</li>
<li>Before sync all should have same flash frequency.</li>
</ul>
ATTN! These should not be tested or run by battery charger

Nice flashlight with 4 LED, flashes blue 12-24V, 19 different programs.

Flashlight with 18 olika blixtmönster. 12-24V. 4LEDx3W. ECE/R65-approved. Orange. 2,5 meter Cable. 28x96x19 mm. IP67. New technology made in one piece

nice Flashlight 12-24V that flashes orange with in total 18 different flash patterns.

A powerful flashlight with 3pcs 3W Epistar LED, Possible to sync several units after eachother. 29x98x41mm
<div class="cssArtItemDescrLong cssTblTxtByClr">
Multivoltage works on 12 and 24V.
Dimension: 30 x 115 x 40mm
</div>

nice LED Flashlight from  Swedstuff, flashes orange with 3 pcs Highpower LED

Super slim warning light with magnetic bracket and cigarette lighter plug manages both 12 & 24V system.
Perfect for you that has high requirements but need a slim model ECE R65! Specifications 12-24V 27W IP67 ECE R65 ECE R10 Diameter: 112mm Height: 48mm

Slim LED warning light with Magnetic bracket and cigarette light plug, 12-24V

Swedstuff LED warninglight, even though its modest size this warninglight delivers lots of light! Warning light is adjusted for flat assembly. IP 56 Dimensions : 100 x 130 mm

Strobe lights