One set of Fliatec sprayfilm. Contains 2 bottles 400 mm. Enough for 4 pcs rims. Can also be applied on mirrors, grills etc.
This spray is settle downs as a layer remowable film. Easy to apply and easy to remove
Two bootles should be enough for 4 pcs rims depending on size and how thick layer you paint.
Here below you can see how this look likes when you spray and remove film
Instruktioner:
1: Clean surface you are applying film on very carefully and work in a dustfree room. If dust or grease is going under the film it will not attach fully.
2. Mask the part you will spray , remove it from car in order to work it easier. If you will paint a rim it is important to mask in order not to get too much spary on wheel , it is hard to remove from tires.
3. Apply: Shake bottle well at use and spray several thin layers. In order to remove film later you need to spray at least 4 layers.
4: After approx. 30 minutes spray has hardened to the degree that you can assemble wheel back again
This spray is settle downs as a layer remowable film. Easy to apply and easy to remove
Two bootles should be enough for 4 pcs rims depending on size and how thick layer you paint.
Here below you can see how this look likes when you spray and remove film
Instruktioner:
1: Clean surface you are applying film on very carefully and work in a dustfree room. If dust or grease is going under the film it will not attach fully.
2. Mask the part you will spray , remove it from car in order to work it easier. If you will paint a rim it is important to mask in order not to get too much spary on wheel , it is hard to remove from tires.
3. Apply: Shake bottle well at use and spray several thin layers. In order to remove film later you need to spray at least 4 layers.
4: After approx. 30 minutes spray has hardened to the degree that you can assemble wheel back again
Stuck? Our experts will get you back on track!
With years of industry experience, we're here to answer your questions.
Contact us

