Favourites

ABS-wheels

Air filters

Boot mats

Brake caliper paint

Driving lights

Gear knobs

H7 LED

Imaz IM5

Japan Racing

LED bars

Maxton Design

Ocean MK18

Poppy

Rims

Sport seats

Window tint

Wind deflectors

Popular products

Audi A4 B7

Audi A4 B8

Audi A6 4G

BMW E61

BMW E90/E91

BMW F10/F11

BMW F20/F21

BMW F30/F31

Volvo S60

Volvo V60

Volvo V70N 2000-2004

Volvo V70NN 2008-2016

Volvo XC60

VW Caddy

VW Golf 4

VW Golf 7

Popular cars

About us

Sustainability

This is SC Styling

Guides

Information

Products

Rear bumper protection -20%

Number of hoses included in the kit: 5
Reinforcement: 3-5 layers
Material: Silicone rubber reinforced with polyester reinforcement Applications: Replaces four original pressure hoses on Saab 9000 Turbo 1985-1989. The kit replaces the following hoses:
* Hose for turbo outlet * Hose for intercooler inlet * Hose for intercooler outlet * Throttle body hose

Number of hoses included in the kit: 4
Reinforcement: 3-5 layers
Material: silicone rubber reinforced with polyester reinforcement
Applications: Replaces four original pressure hoses on Saab 9000 Turbo 1994-1998.
The kit replaces the following hoses:
* Heater hose pack * Heater hose pack * Heater hose pack * Heater hose pack

Number of hoses included in the kit: 2
Reinforcement: 3-5 layers
Material: silicone rubber with polyester reinforcement Applications: Idle engine hoses for Saab 9000 Turbo 1990-1993. The kit replaces the following hoses:
* Idle engine hose * Idle engine hose

Number of hoses included in the kit: 4
Reinforcement: 3-5 layers
Material: Silicone rubber reinforced with polyester reinforcement Applications: Replaces four original pressure hoses on Saab 9000 Turbo 1991-1993. The kit replaces the following hoses:
* Hose for turbo outlet * Hose for intercooler inlet * Hose for intercooler outlet * Throttle body hose

Number of hoses included in the kit: 4
Reinforcement: 3-5 layers
Material: Silicone rubber reinforced with polyester reinforcement Applications: Replaces four original pressure hoses on Saab 9000 Turbo 1988-1990. The kit replaces the following hoses:
* Hose for turbo outlet * Hose for intercooler inlet * Hose for intercooler outlet * Throttle body hose

- Corevolume: 13770cm3 (7411cm3), 86% higher than original! - Air Flow at 0.15bar pressure drop: 356CFM (218CFM), 63% higher than original! See chart below! - Post Intercooler Air Temperature at same conditions: 27°C (45°C), do88 18°C lower! See chart below! - Fits straight into give carmodels! tillverkad helt i aluminium with cad designade flödesoptimerade gjutna tankar and noggrant utvalt cellpaket for ett uppnå bästa möjliga kyleffekt to sammans with lägsta möjliga tryckfall! Always remember that the OEM intercooler was designed for the power level the car was built for and a power increase or even very hard use of the car in a standard version may cause that the OEM intercooler don’t have the performance you need . So already at high loading pressure/softwareupgrade/tuning our intercooler will give a better performance! The OEM intercooler have Plastic ic tanks that don’t keep up with higher boost levels very well so the do88 performance intercooler will also add reliability. Denna högprestanda intercooler har 2,5 (63mm) Hoseconnectionar istället for 2,25 (57mm) som original intercoolern har. Vi har valt att ha grövre connectionar då vi ser en avsevärd flödesforbättring. Därfor ingår det Two Silicone hoses som ersätter originalHosearna for intercoolerns in- and outlet. A normal misunderstanding is that you can't get good cooling effect of an intercooler with this position and frontmounted intercooler / FMIC should be much better. But actually the do88 performance intercooler are far better than most FMIC installations where only a core with small front surface are possible to install and often also installed partially behind thebumper beam which will reduce cooling capacity even further and often cooling below the OEM intercooler are achieved. This Performance intercooler comes with all hardware necessary for installation. This intercooler has of course all brackets for radiator, AC-condenser and air guides are of course on our intercooler.

Markets Absolutely best  intercooler for SAAB 9-3 1.8t 2.0t 2003-!

These hoses are a strong alternative to originalhoses! Our hoses has depending on innerdiameter 3 or 4 layers armour compared to corresponding originalhoses that usually have a layer of armour. Note that our hosekits are manufactured in high quality silicone that resists high temperatures during long periods.

This makes our hose kit to a good upgrade for you that have originalhoses that start to crack when dry, or maybe uses the car in a way that hoses must manage more than cars original hoses was intended for.

Hosekit can be ordered in three different colors, blue /black /red. There is no performance difference between the colors, but you choose the color you like best.

All original-partnumbers are only given as reference number.
Color:Blue
Fits :SAAB 9-3
modelyears : 1999-2003 (1999 only Viggen)
Engine: 2,0T / Aero / Viggen
All engines with black ignition box
Fits  both Manual and Automatic gearbox
Hoses that are included:

- Other

Dessa slangar är ett starkare alternativ till originalslangarna! Våra slangar har beroende på innerdiameter 3 eller 4 lagers armering jämfört med motsvarande originalslangar som oftast har ett lager med armering. Lägg till detta att våra slangkit är tillverkade i högkvalitativt silikon som tål höga temperaturer under långa perioder.

Detta gör våra slangkit till en bra uppgradering för dig som har originalslangar som börjar torrspricka eller kanske använder din bil på ett sätt så att slangarna måste klara mer än bilens originalslangar var avsedda för.

Slangkitet finns att beställa i tre olika färger, Blå / Svart / Röd. Det är ingen prestanda skillnad mellan de olika färgerna, utan du väljer vilken färg du tycker passar bäst.

Alla original-artikelnummer är endast angivna som referensnummer.
Färg:	Blå
Passar:	SAAB 9-3
Årsmodeller: 1999-2003 (1999 bara Viggen)
Motor: 2,0T / Aero / Viggen
Alla motorer med Svart tändkasett
Passar både manuell och automatväxellåda
Slangar som ingår:	

- Öv

Color: Blue
Amount of hoses in kit: Sju
Reinforcement: 4-layers
Temperature durability: -40 - 180 grader C
Wall thickness: 5 mm
Material: Siliconerubber with reinforced polyester-Reinforcement
User areas: Replaces seven original cooling hoses SAAB 9-3ss/sc 4-cyl with Turbo 03-09. The kit replaces following hoses:
<ul>
<li>Hose between cylinderhead and cooler, with original number12787608</li>
<li>Hose between cooler and thermosathousing, with original number12785038</li>
<li>Hose between cooler and expansiontank, with original number12798534</li>
<li>Hose between expansiontank and fuellist, with original number12787736</li>
<li>Hose between expansiontank and thermostat housing, with original number12799198</li>
<li>Hose between heat package and thermostat housing with original number 12798535 &amp; 12798534</li>
</ul>

Color: Blue
Amount of hoses that is including in kit: Tv&aring;
Reinforcement: 4-layers
Temperature durability: -40 - 180 grader C
Wallthickness:5 mm
Material: Silicone rubber reinforced with polyester reinforcement
User areas: Replaces original crank case ventilations hoses on: SAAB 9-5 98-03 & 9-3 99-03 with T7 motorn. Kit replaces following hoses:
<ul>
<li>Hose between valve cover and oilseparator with original number55560463 </li>
<li>Hose between oilseparator and turbo intake manifold with original number55560462</li>
</ul>

- Corevolume: 11803cm3 (6379cm3), This is 85% larger! - Air Flow at 0.15bar pressure drop: 296CFM (227CFM), 30% higher! See chart below! - Post Intercooler Air Temperature at same conditions: 32°C (53°C), this is 21°C lower! See chart below! - Fits straight into give carmodels! (See assembly instructions for details) performance intercooler are an all-aluminum construction with cad designed, flow optimized cast end tanks and optimized core design to achieve best possible cooling efficiency combined with lowest possible pressure drop! Always remember that the OEM intercooler was designed for the power level the car was built for and a power increase or even very hard use of the car in a standard version may cause that the OEM intercooler don’t have the performance you need . So already at high loading pressure/softwareupgrade/tuning our intercooler will give a better performance! The OEM intercooler have Plastic ic tanks that don’t keep up with higher boost levels very well so the do88 performance intercooler will also add reliability. A normal misunderstanding is that you can't get good cooling effect of an intercooler with this position and frontmounted intercooler / FMIC should be much better. But actually the do88 performance intercooler are far better than most FMIC installations where only a core with small front surface are possible to install and often also installed partially behind thebumper beam which will reduce cooling capacity even further and often cooling below the OEM intercooler are achieved. Performance intercooler comes with all brackets which necessary for an safe and easy installation Intercoolern Fits to alla SAAB 9-5 gasoline turbo models 1998-2010.

Markets Absolutely best intercooler solution for SAAB 9-5!

Color: Blue
Amount of hoses in kit: Two
Reinforcement: 4-layers
Temperature durability: -40 - 180 grader C
Wall thickness: 5 mm
Material: Siliconerubber with reinforced polyester-Reinforcement
User areas: Replaces original pressure hose on SAAB 9-5 98-09, gasoline 4-cyl with Turbo. The kit replaces following hoses:
<ul>
<li>Hose between turbo and intercooler with original number4966735</li>
<li>Hose between intercooler and Inlet pipe kit with original number4966701</li>
</ul>

Well designed This performance intercooler replaces the original / OEM intercooler and provides a true performance upgrade without the need of rebuilding the whole car! This is certainly the most elaborate intercooler on the market for this car. This intercooler is so maxed in size that it utilizes every available millimeter in front.. Heavy advantages with this high performance intercoler compared with (original intercooler): - Corevolume: 10397cm3 (4675cm3), This is 222% higher than original! - Air Flow at 0.15bar pressure drop: 325CFM (267CFM), 22% higher ! See chart below! - Fits in given carmodels in list below! This model of the intercooler is known as a Cross-Flow / X-flow intercooler. That is an intercooler which has the inlet on one side and the outlet on the other. SAAB 900 (94-) and the first years of 9-3 (98-99) do not have the Cross-Flow intercooler from factory, but an intercooler with inlet / outlet on the same side.To install this intercooler on cars that do not have Cross-Flow from factory also need to replace the intercooler hoses Performance intercooler are an all aluminium construction with cad designed, flow optimized cast end tanks and optimized core design (570x240x76mm) to achieve best possible cooling efficiency combined with lowest possible pressure drop! Always remember that the OEM intercooler was designed for the power level the car was built for and a power increase or even very hard use of the car in a standard version may cause that the OEM intercooler don’t have the performance you need . So already at high loading pressure/softwareupgrade/tuning our intercooler will give a better performance! The OEM intercooler have Plastic ic tanks that don’t keep up with higher boost levels very well so the do88 performance intercooler will also add reliability. Performance intercooler comes with all brackets which necessary for an safe and easy installation

Markets best intercooler for  SAAB 900/9-3 Turbo 94-02!

Throttle body hose that replaces the original hose. Choose between blue, red or black.
These hoses are a stronger alternative to original hoses. The hoses have three to five layers of reinforcement, compared to the corresponding original hoses which usually have only one layer. The kits are made of high-quality silicone that can withstand high temperatures for long periods of time.
This makes them a good upgrade for those who have original hoses that are starting to dry crack, or perhaps use their car in a way that the hoses have to withstand more than the car's original hoses.
The hose kit is available in different colours. There is no performance difference between the different colours, but you choose the colour you think fits best.
Fits: Saab 900 Turbo Year models: 1986-1993 Engine: 16V Turbo (T16)

Throttle body hose that replaces the original hose. Choose between blue or black.


These hoses are a stronger alternative to the original hoses. The hoses have three to five layers of reinforcement, compared to the corresponding original hoses that usually only have one layer. The kits are made of high-quality silicone that can withstand high temperatures for long periods of time.
This makes them a good upgrade for those who have original hoses that are starting to dry crack, or perhaps use their car in a way that the hoses have to withstand more than the car's original hoses.
The hose kit is available in different colours. There is no performance difference between the different colours, but you choose the colour you think fits best.
Fits: SAAB 9-3 Year models: 2004- Engine: 1.9 TiD 118hp / 148hp Engine code: Z19DT Z19DTH
Note! This hose kit is equipped with an inner layer of the highest quality fluorosilicone rubber to give the hose extra chemical resistance and longevity.

Turbo exhaust hose. Fits Saab 9-3 1.9 TiD.


These hoses are a stronger alternative to the original hoses. The hoses have three to five layers of reinforcement, compared to the corresponding original hoses which usually only have one layer. The kits are made of high-quality silicone that can withstand high temperatures for long periods of time.
This makes them a good upgrade for those who have original hoses that are starting to dry crack, or perhaps use their car in a way that the hoses have to withstand more than the car's original hoses.
The hose kit is available in different colours. There is no performance difference between the different colours, but you choose the colour you think fits best.
Fits: SAAB 9-3 Model year: 2008-2011 Engine: 1,9 TTiD 130 / 160 / 180hp Engine code: Z19DTR
Note! This hose kit is equipped with a high quality fluorosilicone rubber inner layer to give the hose extra chemical resistance and longevity.
Replaces: Turbo outlet hose Reference: 12782510, 18.12S20097A, 1278250

Turbo exhaust hose. Fits Saab 9-3 TTiD 2008-2011.


Garrett turbo GT1752 to  SAAB 9-3 00-02 and 9-5 98-10. Good turbo from wellknown Garrett Fits  SAAB 9-3 4 Cyl 00-02 SAAB  9-5 98-10

Turbocharger replacable Garrett to SAAB 9-3 00-02 and SAAB 9-5 98-10 2,0T & 2,3T.
Bigseller to SAAB cars, assemblykit with gaskets, studs and other copper gaskets included


Water cooler designed to provide the best cooling performance in demanding conditions. It's made of aluminium with fully sealed welds that give it durability and endurance when needed.
- 83% larger cell pack volume, 13488 cm3 vs 7360 cm3 (automatic). - 238% greater cell pack volume, 13488 cm3 vs 4439cm3 (manual). - Drop-in assembly, no modifications are necessary (see assembly instructions). - High efficiency cell pack with 8mm high multi-louvered design cooling cells. - 2 row cell pack (dual core design), 50mm thick.
 Fits: SAAB 9-3 Year models: 2003-2011 Engine: 1.8T, 2.0T Gearbox: Suitable for both manual and automatic.

Water cooler designed for the best cooling performance in demanding conditions. It is made of aluminium with fully seamed welds that give it durability and endurance when it is really needed.

Water cooler designed to provide the best cooling performance in demanding conditions. It's made of aluminium with fully seamed welds that give it durability and endurance when needed.
- Drop-in assembly, no modifications are necessary (see assembly instructions). - High efficiency cell pack with 8mm high multi-louvered design cooling cells. - 2 row cell pack (dual core design), 50mm thick. - 83% larger cell pack volume, 13488 cm3 vs 7360 cm3.
 Fits: SAAB 9-3 Model year: 2006-2011 Engine: V6 2.8 Turbo Gearbox: Suitable for both manual and automatic transmissions

Water cooler designed to provide the best cooling performance in demanding conditions. It's made of aluminium with fully sealed welds that give it durability and endurance when needed.
- 48% larger cell pack volume, 8979 cm3 vs 6063 cm3 - Highly efficient cell pack with 8mm high multi-louvered design cooling cells. - 2 row cell pack (dual core design), 40mm thick.
 Fits: SAAB 9-5 Year models: 2002-2010 Engine: All 4-cylinder petrol 2.0t / 2.3t / Aero Engine code: B205 B235

Water cooler designed to provide the best cooling performance in demanding conditions. It is made of aluminium with fully seamed welds that give it durability and endurance when it is really needed.

This water cooler is designed for the best cooling performance in demanding conditions.
- Highly efficient cell pack with 8mm high cooling cells of multi-louvered design. - 2-row cell pack (dual core design), 40mm thick. - 48% larger cell pack volume, 8979 cm3 vs 6063 cm3.
Fits: SAAB 9-5 Model year: 1998-2001 Engine: All 4-cylinder petrol 2.0t / 2.3t / Aero Engine code: B205 B235 Other: In order for the product to fit the specified model, it is delivered with a hose.

This water cooler is designed for the best cooling performance in demanding conditions. 


Water cooler designed to provide the best cooling performance in demanding conditions. It's made of aluminium with fully seamed welds that give it durability and endurance when it's needed most.
- Easy assembly - High efficiency cell pack with 8mm high multi-louvered design cooling cells. - 2 row cell pack (dual core design), 40mm thick. - Socket for thermal contact available (M22x1.5, original thread). Supplied with cover for this socket.
 Fits: SAAB 900 Turbo Year models: 1979-1993 Engine: 8V Turbo (T8), 16V Turbo (T16)
SAAB 900i Model year: 1979-1993 Engine: All engines

This water cooler is designed for optimum cooling performance in demanding conditions. It is made of aluminium with fully seamed welds that give it durability and endurance when it is really needed.

Water cooler designed to provide the best cooling performance in demanding conditions. It is made of aluminium with fully sealed welds that give it durability and endurance when needed.
- High efficiency cell pack with 8mm high multi-louvered design cooling cells. - 2-row cell pack (dual core design), 50mm thick. - 27% larger cell pack volume, 9325 cm3 vs 7350 cm3.
 Fits: SAAB 900 Turbo Model year: 1994-1998 Engine: All 4-cylinder petrol Turbo
SAAB 9-3 Model year: 1998-2002 Engine: All 4-cylinder petrol Turbo

Water cooler designed for optimum cooling performance in demanding conditions. It is made of aluminium with fully seamed welds that give it durability and endurance when it is really needed.

Color: Blue Reinforcement: 4-layers Temperature durability: -40 - 180℃ Wallthickness: 5 mm Material: Silicone rubber reinforced with polyester reinforcement. User areas: Replaces original intake hose on SAAB 9-5 4-cyl turbo 1998-2009.
Replaces following hoses: Hose between air mass meter and turbo inlet pipe with original number 4967550.
Fits: SAAB 9-5 Model years: 1998-2009 Engine: 2.0T 2.3T Aero Engine code: B205 B235