Skip
Bosch Injector 968 Green 465cc
Bosch Injector 968 Green 465cc

Bosch Injector 968 Green 465cc

Show price history
Backorder item | Sent in about 10 working days
Visa
Mastercard
Google Pay

High impedance - 0280155968

Item Number: B-0280155968 EAN code: 3165143299999

Original on the following car models: - Volvo C70 2.4T 200HP 02-05 - Volvo S60R 2.5T AWD 300HP 2003- - Volvo V70 2.3 AWD 265HP 98-00 - Volvo V70R 2.5T AWD 300HP 2003-

Details: - Name: Bosch 465cc - Item Number: 0280155968 / 0280 155 968 / Bosch -968 - Packaging: 1x - Connection: Bosch JPT EV1 Minitimer Jetronic - Length: 60.65mm - EV 14L (Long) - Injector tip: 11mm - O-ring top: 14mm Viton - O-ring bottom: 14mm Viton - Body diameter: 16mm - Coil resistance: 12.2 ohm - Spray pattern: 30 degrees - Spray angle: Straight (0 degrees)

Measured static max flow in test environment: - 29 PSI (2 bar) 356cc/min = 34 lb/h - 43.5 PSI (3 bar) 430cc/min = 41 lb/h - 58 PSI (4 bar) 492cc/min = 47 lb/h - 78.5 PSI (5 bar) 555cc/min = 53 lb/h - 88 PSI (6 bar) 606cc/min = 58 lb/h - 101.5 PSI (7 bar) 666cc/min = 63 lb/h - (55 PSI (3.8 bar) 480cc/min = 46 lb/h)

Note: Testing environment versus practical use can have significant varying conditions depending on auxiliary equipment and other technical factors. However, this is very good info on what to expect from the injectors and fundamental information when choosing other components in the fuel system such as fuel pump, fuel pressure regulator and fuel filter.

Turbo engine power: - Gasoline 10% margin - 1 cylinder - 57hp (57x1) - 4 cylinders - 228hp (57x4) - 5 cylinders - 285hp (57x5) - 6 cylinders - 342hp (57x6) - 8 cylinders - 456hp (57x8) - Ethanol 10% margin - 1 cylinder - 49hp (49x1) - 4 cylinders - 196hp (49x4) - 5 cylinders - 245hp (49x5) - 6 cylinders - 294hp (49x6) - 8 cylinders - 392hp (49x8)

Flow matching: These injectors are delivered directly with factory tolerances unless you choose for us to flow match them with much smaller tolerances than factory. Choosing for them to be flow matched with us before delivery is always recommended if you are not confident that the injectors' factory tolerances can differ somewhat. Either you can run them un-matched with larger tolerances, match the injectors yourself or compensate for that the injectors may vary a bit in flow during mapping in the control system. How much they differ from factory always varies.

Documentation and certification: If you choose for us to match the injectors, this is done with our top equipment! Documentation and certificates from us accompany the injectors when this option is chosen.

Stuck? Our experts will get you back on track!

With years of industry experience, we're here to answer your questions.

Contact us
Checkmark60 days open purchase on stock items
CheckmarkOver 100,000 satisfied customers
CheckmarkSuper-fast delivery
CheckmarkSupport that assists you
Trygg e-handel

Trygg E-handel

We are certified with Trygg E-handel