Name: Bosch 731cc
Part Number: 0280158112 / 0280 158 112 / Bosch -112
Package: 1x
Connector: Bosch JPT EV1 Minitimer Jetronic
Length: 39mm - EV 14S (Standard)
Injector Tip: xT 24mm
O-ring Top: 14mm Viton
O-ring Bottom: 14mm Viton
Body Diameter: 16mm
Resistance Coil: 12 ohm
Injector Pattern: Single cone
Spray Angle:
Fuel: E85 / M100 compatible and capable of handling other common fuels due to stainless internal parts. NOTE! If the injector is to be run on methanol, it must be flushed with regular fuel after use. This means the injector should not be left with methanol for extended periods.
Flow Matching: These injectors are delivered directly with factory tolerances unless you choose to have them flow matched with much tighter tolerances than factory. Choosing to have them matched with us before delivery is always recommended unless you are aware that the injectors' factory tolerances can differ somewhat. You either run them unmatched with larger tolerances, match them yourself, or compensate for the fact that the injectors might differ somewhat in flow during mapping in the control system. How much they differ from factory always varies.
Stuck? Our experts will get you back on track!
With years of industry experience, we're here to answer your questions.
Contact us
