## Bosch Injector 630cc
High ohm - 0280158123
Original fit for the following car models: * Porsche 997 3.6 GT2 530HP 07-12 * Porsche 997 3.6 GT2 RS 620HP 10-12 * Porsche 3.6 Turbo 480HP 06-09
Name: Bosch 630cc Article number: 0280158123 / 0280 158 123 / Bosch -123 OEM number: * 997 605 132 00 * 997 605 132 01 * 997 605 132 02 Packaging: 1x Connector: Bosch JPT EV1 Minitimer Jetronic Length: 48.65mm - EV 14S (Standard) Use bottom adapter to achieve 60.65mm EV 14L (Long) Injector Tip: xT 24mm O-ring top: 14mm Viton O-ring bottom: 14mm Viton Body diameter: 16mm Coil resistance: 12 ohm Injector pattern: 30 degrees 2 jets Spray angle: Straight (0 degrees) Flow @ 3bar: 429g / 627cc/ 627cm3 Fuel: E85 / M100 compatible and withstands other common fuels due to its stainless internal components. Note! If the injector is to be used on methanol, it must be flushed with regular fuel after use. That is, the injector must not be left with methanol for an extended period.
Measured static max flow in testing environment * 29 PSI (2 bar) 492cc / min = 47 lb / h * 43.5 PSI (3 bar) 612cc / min = 58 lb / h * 58 PSI (4 bar) 708cc / min = 67 lb / h * 78.5 PSI (5 bar) 738cc / min = 70 lb / h * 88 PSI (6 bar) 870cc / min = 83 lb / h * 101.5 PSI (7bar) 942cc / min = 90 lb / h
Please note that testing environment versus practical use can have significant variances depending on ancillary equipment and other technical factors. However, this is excellent information about what to expect from the injectors and basic information when selecting other components of the fuel system such as fuel pumps, fuel pressure regulators, and fuel filters.
Turbo engine performance * Gasoline 10% margin * 1-cylinder - 83hp (83x1) * 4-cylinder - 332hp (83x4) * 5-cylinder - 415hp (83x5) * 6-cylinder - 498hp (83x6) * 8-cylinder - 664hp (83x8) * Ethanol 10% margin * 1-cylinder - 72hp (72x1) * 4-cylinder - 288hp (72x4) * 5-cylinder - 360hp (72x5) * 6-cylinder - 432hp (72x6) * 8-cylinder - 576hp (72x8)
N/A engine performance * Gasoline 10% margin * 1-cylinder - 108hp (108x1) * 4-cylinder - 432hp (108x4) * 5-cylinder - 540hp (108x5) * 6-cylinder - 648hp (108x6) * 8-cylinder - 864hp (108x8) * Ethanol 10% margin * 1-cylinder - 90hp (90x1) * 4-cylinder - 360hp (90x4) * 5-cylinder - 450hp (90x5) * 6-cylinder - 540hp (90x6) * 8-cylinder - 720hp (90x8)
Flow matching These injectors are delivered directly with factory tolerances unless you choose for us to flow match them with much lower tolerances than factory. We always recommend choosing to have them flow matched with us before delivery if you do not have control over the fact that their factory tolerances may differ somewhat. You can either run them unmatched with larger tolerances, match the injectors yourself or compensate for the fact that the injectors may differ slightly in flow when mapping in the control system. How much they differ from factory varies always.
Stuck? Our experts will get you back on track!
With years of industry experience, we're here to answer your questions.
Contact us
