Model: Bosch 731cc S
Packaging: 1 piece
Connector: Nippon / Denso / Sumitomo
- Length: 48.65mm (Standard) - Use top adapter for 60.65mm (Long)
- Injector Tip: 11mm
- Top O-ring: 14mm Viton
- Bottom O-ring: 14mm Viton
- Body Diameter: 16mm
- Coil Resistance: 8.5 ohm
- Nozzle: 9 holes
- Spray Pattern: 4x Conical
- Spray Angle: Straight (0 degrees)
- Flow Rate: 731cc/min = 500g/min = 66lb/h @ 3 bar
Fuel Compatibility: Compatible with E85 / M100 and other common fuels due to stainless internal components. Note: If the injector is to be used with methanol, it should be flushed with regular fuel after use; do not leave the injector sitting with methanol for extended periods.
Engine Power Outputs
Turbocharged Engine (Gasoline) 10% Margin:
- 1-cylinder - 96hp
- 4-cylinder - 384hp
- 5-cylinder - 480hp
- 6-cylinder - 576hp
- 8-cylinder - 768hp
Turbocharged Engine (Ethanol) 10% Margin:
- 1-cylinder - 83hp
- 4-cylinder - 332hp
- 5-cylinder - 415hp
- 6-cylinder - 498hp
- 8-cylinder - 664hp
NA Engine (Gasoline) 10% Margin:
- 1-cylinder - 125hp
- 4-cylinder - 500hp
- 5-cylinder - 625hp
- 6-cylinder - 750hp
- 8-cylinder - 1000hp
NA Engine (Ethanol) 10% Margin:
- 1-cylinder - 104hp
- 4-cylinder - 416hp
- 5-cylinder - 520hp
- 6-cylinder - 624hp
- 8-cylinder - 832hp
Flow Matching
These injectors are delivered with factory tolerances unless you choose flow matching service, which involves tighter tolerances than factory. It is recommended to select flow matching unless you are equipped to manage the factory tolerances yourself. You may either run them unmapped with larger tolerances, match them yourself, or compensate for possible flow variations during tuning. The variance from factory specifications will always vary.
If you opt for our flow matching service, this is performed using top-of-the-line equipment! Documentation and certification will accompany the injectors when this option is selected.
Commonly ensured facts are retained. For any inquiries regarding this product, please reach out!
Stuck? Our experts will get you back on track!
With years of industry experience, we're here to answer your questions.
Contact us
