Description of Bosch 731cc Injector Name: Bosch 731cc C Flow: 731cc/min = 500g/min = 66lb/h @ 3bar Article Number: 0280158291 / 0280 158 291 / Bosch -291 Packaging: 1x Connection: Bosch USCAR Length: 33.6mm - EV 14C (Compact) Use a long top adapter to achieve 60.65mm EV 14L (Long) Injector Tip: 11mm O-ring top: 14mm Viton O-ring bottom: 14mm Viton Body Diameter: 16mm Coil Resistance: 12 ohm Injector Pattern: Conical (30 degrees) Spray Angle: Straight (0 degrees) Fuel: E85 / M100 compatible and withstands other common fuels due to stainless internal components. Note! If the injector is to be run on methanol, it should be flushed with regular fuel after use. That is, the injector should not be left with methanol over time. Engine Power Turbo Gasoline 10% margin 1cyl - 96hp (96x1) 4cyl - 384hp (96x4) 5cyl - 480hp (96x5) 6cyl - 576hp (96x6) 8cyl - 768hp (96x8)
Ethanol 10% margin 1cyl - 83hp (83x1) 4cyl - 332hp (83x4) 5cyl - 415hp (83x5) 6cyl - 498hp (83x6) 8cyl - 664hp (83x8)
Engine Power N/A Gasoline 10% margin 1cyl - 125hp (125x1) 4cyl - 500hp (125x4) 5cyl - 625hp (125x5) 6cyl - 750hp (125x6) 8cyl - 1000hp (125x8)
Ethanol 10% margin 1cyl - 104hp (104x1) 4cyl - 416hp (104x4) 5cyl - 520hp (104x5) 6cyl - 624hp (104x6) 8cyl - 832hp (104x8) Flow matching: These injectors are delivered directly with factory tolerances unless you choose to have us flow match them with much lower tolerances than factory. We always recommend that you have them flow matched by us before delivery unless you are fully aware of the factory tolerances, which can vary significantly. You can either run them un-matched with larger tolerances, match them yourself, or compensate for the fact that the injectors might differ slightly in flow during mapping in the control system. How much they differ from the factory always varies.
Stuck? Our experts will get you back on track!
With years of industry experience, we're here to answer your questions.
Contact us
