Bosch injector 621cc
Item number: 0280158298 / 0280 158 298 / Bosch -298
Packaging: 1x
Connector: 2-pin USCAR
Length: 48.65mm - EV 14S (Standard)
Injector tip: xT 24mm
O-ring top: 14mm Viton
O-ring bottom: 14mm Viton
Body diameter: 16mm
Coil resistance: 12 ohm
Fuel: E85 / M100 compatible and withstands other common fuels due to the stainless internal parts. Note! If the injector is to be run on methanol, it must be flushed with regular fuel afterwards. That is, the injector should not stand with methanol over time.
Flow matching: These injectors come straight with factory tolerances unless you choose for us to flow match them with much tighter tolerances than factory. We always recommend choosing for them to be flow matched by us before delivery unless you know that the injectors' factory tolerances can vary. You either run them unmatched with larger tolerances, match the injectors yourself, or compensate for the fact that the injectors can vary slightly in flow when mapping in the control system. How much they differ from factory always varies.
When you choose for us to match the injectors, this is done with our top-notch equipment! Documentation and certification from us accompanies the injectors when you choose this option.
Stuck? Our experts will get you back on track!
With years of industry experience, we're here to answer your questions.
Contact us
