High impedance - 028015840P (USCAR)
Tags: 1100cc, 33.5mm
Description:
Unmodified Bosch Motorsport injector with precise spray pattern. The most accurate injector available in its size.
- Name: Bosch 1100cc Performance
- Packaging: 1x
- Connector: Bosch USCAR
- Length: 33.6mm - EV 14C (Compact). Use short top adapter and short bottom adapter for 60.65mm EV 14L (Long)
- Injector Tip: 24mm xT
- Top O-ring: 14mm Viton
- Bottom O-ring: 14mm Viton
- Body Diameter: 16mm
- Coil Resistance: 12 ohm
- Spray Pattern: Conical (30 degrees)
- Spray Angle: Straight (0 degrees)
Measured Static Max Flow in Test Environment:
- Static flow at 3bar (43.5psi) = 980cc/min
- Static flow at 4bar = 1140cc/min
- Static flow at 5bar = 1260cc/min
- Static flow at 6bar = 1420cc/min
Note that test environment vs. practical use can have significant varying conditions depending on ancillary equipment and other technical factors. Nonetheless, this is highly useful information regarding what to expect from the injectors and basic information when selecting other components in the fuel system such as fuel pump, fuel pressure regulator, and fuel filter.
Engine Power Turbo:
- Petrol 10% Margin:
- 1cyl - 129hp (129x1)
- 4cyl - 516hp (129x4)
- 5cyl - 645hp (129x5)
- 6cyl - 774hp (129x6)
- 8cyl - 1032hp (129x8)
- Ethanol 10% Margin:
- 1cyl - 112hp (112x1)
- 4cyl - 448hp (112x4)
- 5cyl - 560hp (112x5)
- 6cyl - 672hp (112x6)
- 8cyl - 896hp (112x8)
Engine Power N/A:
- Petrol 10% Margin:
- 1cyl - 168hp (168x1)
- 4cyl - 672hp (168x4)
- 5cyl - 840hp (168x5)
- 6cyl - 1008hp (168x6)
- 8cyl - 1344hp (168x8)
- Ethanol 10% Margin:
- 1cyl - 140hp (140x1)
- 4cyl - 560hp (140x4)
- 5cyl - 700hp (140x5)
- 6cyl - 840hp (140x6)
- 8cyl - 1120hp (140x8)
Flow Matching:
These injectors are delivered with basic flow matching and a check to ensure there are no leaks. The basic flow matching has acceptable tolerances within 3% variation over a dynamic range but documentation and other data are not provided with this option. When you choose to have us perform a proper flow matching, we will match the injectors more closely within 1% variation, and documentation will accompany the injectors and flow matching. We also check additional parameters such as spray pattern, resistance, etc.
Stuck? Our experts will get you back on track!
With years of industry experience, we're here to answer your questions.
Contact us
