The solution for excessive fuel pressure during trimming. Retain the original fuel rail with genuine motorsport capacity.
When upgrading to a more powerful fuel pump (e.g., Walbro, SPD, AEM, or DeatschWerks), the original regulator's small return hole of ~1.5mm quickly becomes a bottleneck. The result? The fuel cannot escape, pressure skyrockets at idle, and the engine runs far too rich.
This is the ultimate 'sleeper' upgrade. It installs directly into your original fuel rail but delivers performance on par with large, external aftermarket regulators. The secret lies in the massive return hole of 3.6 mm that allows for an extremely high return flow. Now you can run high-capacity pumps while maintaining a perfect, stable fuel pressure curve across the entire range.
This premium regulator is fully adjustable between 0 and 5 bar, making it perfect for both advanced tuning, turbo conversions, and switching to ethanol (E85).
Key Features & Benefits:
- Massive Return Flow: Upgraded return hole of 3.6 mm (compared to the original's approx. 1.5 mm) effectively prevents runaway fuel pressure at idle and light loads.
- Seals Tightly and Maintains Residual Pressure: The high-quality valve seat seals completely tight when the engine is turned off. The system retains fuel pressure when the car is parked, eliminating long crank times and providing a directly-started vehicle.
- Linear 1:1 Vacuum/Pressure Compensation: Equipped with a vacuum connection that raises fuel pressure in a precise 1:1 ratio to the engine's boost pressure. Guarantees stable fuel supply on both naturally aspirated and heavily boosted turbo/compressor builds.
- Genuine Bolt-On: Compact design that fits directly into the original fuel rail. Say goodbye to cumbersome AN fittings, cut hoses, and bulky external regulators on the firewall.
- Motorsport Adjustable: Mechanical adjustment screw gives you full control to fine-tune the base pressure from 0 to 5 bar.
- E85 Ready: Designed to withstand aggressive fuels such as ethanol (E85), gasoline, and diesel.
Specifications
- Adjustment Range: 0 – 5.0 Bar
- Return Hole Inner Diameter: 3.6 mm
- Number of Outputs: 1 (with vacuum/pressure compensation 1:1)
- Compatible Fuels: Gasoline, Ethanol (E85), Diesel
Model-Specific Applications (A selection of common platforms)
This compact standard design (often referred to as Bosch type with lock ring/flange) can now be used on performance classics and popular tuning objects. Always check your original regulator against the image and reference number before purchase.
- Volvo: 740 / 744 / 745, 940 / 944 / 945, 960, 850 / 854 / 855, S70 / V70 Gen 1 (Perfect for Redblock & Whiteblock such as B230F/FT/FK, B6304, B5254S and T-5 / T-5R / R with B5234FT up to around 1999)
- Volkswagen: Gol, Parati, Saveiro, Santana, Golf MK3 / MK4, Corrado, Passat (Perfect for VW AP engines 1.6/1.8/2.0 Turbo/Naturally aspirated, GTI 16V, VR6 12V/24V, and early 1.8T 20V)
- Audi: 80 / 90 / 100 (2.6 & 2.8 V6), A3 Gen 1 & TT Mk1 (1.8T 150/180/225hp)
- Fiat: Uno (Turbo/Maggia), Palio, Siena, Marea, Fiorino
- Saab: 900 II, 9-3 Gen 1, 9-5 Gen 1 (Models with standard fuel rail of plug-in type, e.g. B204, B205, B235)
Stuck? Our experts will get you back on track!
With years of industry experience, we're here to answer your questions.
Contact us
