Name: Bosch 1300cc
Packaging: 1x injector + 2x adapter
Connector: Bosch JPT EV1 Minitimer Jetronic
Length:
- 33.6mm - EV 14C (Compact) Use long top adapter for 60.65mm
- EV 14L (Long)
Injector Tip: xT 24mm
O-Ring Top: 14mm Viton
O-Ring Bottom: 14mm Viton
Body Diameter: 16mm
Coil Resistance: 12 ohm
Injector Spray Pattern: Conical (30 degrees)
Spray Angle: Straight (0 degrees)
Fuel Compatibility:
Compatible with E85 / M100 and other common fuels due to stainless internal components. Note: If the injector is used with methanol, it must be flushed with regular fuel afterward. Do not leave the injector sitting with methanol for extended periods.
Engine Performance Turbo
Gasoline 10% margin:
- 1 cylinder -
- 4 cylinders -
- 5 cylinders -
- 6 cylinders -
- 8 cylinders -
Ethanol 10% margin:
- 1 cylinder -
- 4 cylinders -
- 5 cylinders -
- 6 cylinders -
- 8 cylinders -
Engine Performance N/A
Gasoline 10% margin:
- 1 cylinder -
- 4 cylinders -
- 5 cylinders -
- 6 cylinders -
- 8 cylinders -
Ethanol 10% margin:
- 1 cylinder -
- 4 cylinders -
- 5 cylinders -
- 6 cylinders -
- 8 cylinders -
Flow Matching
This injector is delivered directly with factory tolerances unless you choose to have them flow-matched with significantly tighter tolerances. We always recommend opting for flow matching unless you are certain that the factory tolerances are acceptable. You can either run them un-matched with larger tolerances, match them yourself, or compensate for the potential flow discrepancies during mapping in the management system. The degree of deviation from factory tolerances varies.
When you select the flow matching option, this is performed with our top-tier equipment. Documentation and certification will accompany the injectors if this option is selected.
Stuck? Our experts will get you back on track!
With years of industry experience, we're here to answer your questions.
Contact us
