Bosch Injector 1200cc
Name: Bosch 1200cc Part Number: 0280 158 xxx (modified) Packaging: 1x + 2x adapter Connection: Bosch JPT EV1 Minitimer Jetronic Length: 33.6mm - EV 14C (Compact) Use included adapters to get 60.65mm EV 14L (Long) Injector Tip: xT 24mm O-ring Top: 14mm Viton O-ring Bottom: 14mm Viton Body Diameter: 16mm Resistance Coil: 12 ohm Spray Pattern: Conical (30 degrees) Injection Angle: Straight (0 degrees) Fuel: E85 / M100 compatible and withstands other common fuels due to the stainless steel internal parts. NOTE! If the injector is to be run on methanol, it should be flushed with regular fuel after use. In other words, the injector should not be left with methanol over time.
Motor Power Turbo Gasoline 10% margin 1cyl - 157hp (157x1) 4cyl - 628hp (157x4) 5cyl - 785hp (157x5) 6cyl - 942hp (157x6) 8cyl - 1256hp (157x8)
Ethanol 10% margin 1cyl - 137hp (137x1) 4cyl - 548hp (157x4) 5cyl - 685hp (157x5) 6cyl - 822hp (157x6) 8cyl - 1096hp (157x8)
Motor Power N/A Gasoline 10% margin 1cyl - 205hp (205x1) 4cyl - 820hp (157x4) 5cyl - 1025hp (157x5) 6cyl - 1230hp (157x6) 8cyl - 1640hp (157x8)
Ethanol 10% margin 1cyl - 171hp (171x1) 4cyl - 684hp (157x4) 5cyl - 855hp (157x5) 6cyl - 1026hp (157x6) 8cyl - 1368hp (157x8)
Flow Matching These injectors are delivered directly with factory tolerances unless you choose to have them flow-matched with much tighter tolerances than factory. We always recommend selecting them to be flow-matched with us before delivery if you don't have an understanding of the fact that factory tolerances may vary. You can either operate them with unmatched wider tolerances, match them yourself or compensate for potential flow differences when mapping in the control system. The amount they deviate from factory varies.
Stuck? Our experts will get you back on track!
With years of industry experience, we're here to answer your questions.
Contact us
